White
Showing 33–64 of 235 results
-
Portable Cord, SEOOW
SEOOW 16/3 105C 600V – White
SEOOW 16/3 AWG portable cord is constructed with stranded, bare copper conductors. Its thermoplastic elastomer insulation makes it chemical, heat, abrasion, weather, water, exterior and interior oil resistant, allowing it to pass the CSA FT2 flame test. With minimum and maximum temperatures of -50°C and 105°C, as well as a rated voltage of 600V, it’s ideal for use in indoor and outdoor temporary power uses, portable industrial machinery and compressors, food processing and washdown facilities.
Min/Mult: 100/50
SKU: WSEOOW16/3WHT-I -
Automotive Wire & Cable, Primary Cable, SGR
SGR 2/0 AWG 90C 60V – Bare Copper
SGR 2/0 AWG Automotive Primary Cable is constructed with stranded, bare copper conductors. Its ethylene propylene diene monomer insulation makes it chemical and heat resistant. With minimum and maximum temperatures of -40°C and 90°C, as well as a rated voltage of 60V, it’s ideal for use in automotive applications serving as the interconnection between batteries and starter or ground in vehicles.
Min/Mult: 50/10
SKU: WSGR2/01196-B -
Hook-up & Lead Wire, SGR
SGR 4/0 AWG 90C 60V – Bare Copper
SGR 4/0 AWG Automotive Primary Cable is constructed with stranded, bare copper conductors. Its ethylene propylene diene monomer insulation makes it chemical and heat resistant. With minimum and maximum temperatures of -40°C and 90°C, as well as a rated voltage of 60V, it’s ideal for use in automotive applications serving as the interconnection between batteries and starter or ground in vehicles.
Min/Mult: 50/50
SKU: WSGR4/01026-B -
Automotive Wire & Cable, Primary Cable, SGT
SGT 02 AWG 133 Strand 80C 60V – Bare Copper
SGT 2 AWG Automotive Primary Cable is constructed with stranded, bare copper conductors. Its ethylene propylene diene monomer insulation makes it chemical and heat resistant. With minimum and maximum temperatures of -40°C and 105°C, as well as a rated voltage of 60V, it’s ideal for use in automotive starters and battery grounds.
Min/Mult: 50/10
SKU: WSGT02133-B -
Automotive Wire & Cable, Primary Cable, SGT
SGT 2/0 AWG 133 Strand 80C 60V – Bare Copper
SGT 2/0 AWG Automotive Primary Cable is constructed with stranded, bare copper conductors. Its ethylene propylene diene monomer insulation makes it chemical and heat resistant. With minimum and maximum temperatures of -40°C and 105°C, as well as a rated voltage of 60V, it’s ideal for use in automotive starters and battery grounds.
Min/Mult: 50/10
SKU: WSGT2/0133-B -
Automotive Wire & Cable, Primary Cable, SGX
SGX 3/0 AWG 1615 Strand 125C 60V – Bare Copper
SGX 3/0 AWG Automotive Primary Cable is constructed with stranded, bare copper conductors. Its crosslinked polyethylene or polyvinylchloride insulation makes it chemical and heat resistant. With minimum and maximum temperatures of -40°C and 125°C, as well as a rated voltage of 60V, it’s ideal for use in automotive starters and battery grounds.
Min/Mult: 50/10
SKU: WSGX3/01615-B -
Hook-up & Lead Wire, SIF, Silicone Insulated Wire
SIF 17 AWG 32 Strand 250C 300V – Tinned Copper
SIF 17 AWG silicone insulated wire is constructed with stranded, tinned copper or nickel plated conductors. Its silicone rubber insulation makes it chemical, weather, flame and moisture resistant, allowing it to pass the flame test. With a 250°C maximum temperature and a rated voltage of 300V, it’s ideal for internal appliance wiring, medical equipment and industrial temperature control systems.
Min/Mult: 100/50
SKU: WSIF1732-T -
Hook-up & Lead Wire, SIF
SIF 18 AWG 24 Strand 250C 300V – Tinned Copper
SIF 18 AWG silicone insulated wire is constructed with stranded, tinned copper or nickel plated conductors. Its silicone rubber insulation makes it chemical, weather, flame and moisture resistant, allowing it to pass the flame test. With a 250°C maximum temperature and a rated voltage of 300V, it’s ideal for internal appliance wiring, medical equipment and industrial temperature control systems.
Min/Mult: 100/50
SKU: WSIF1824-T -
Portable Cord, SJT
SJT 16/3 18/2 105C 300V – White
SJT 16/3 18/2 AWG portable cord is constructed with stranded, bare copper conductors – sizes are as follows:
- 3 Conductors are 16AWG
- 2 Conductors are 18 AWG
- Total 5 conductors within a single jacket.
Its thermoplastic polyvinylchloride insulation makes it chemical, heat and abrasion resistant allowing it to pass not only the UL VW-1 & CSA FT2 flame test. With temperatures of 60°C, 75°C, 90°C and 105°C, as well as a rated voltage of 300V, it’s ideal for use in light duty portable cordage of tools, dishwashers, medical equipment and office machinery.
Min/Mult: 50/50
SKU: WSJT16/318/2-B01 -
Portable Cord, SJTOW
SJTOW 18/3 60C 300V – White
SJTOW 18/3 AWG portable cord is constructed with stranded, bare copper conductors. Its thermoplastic polyvinylchloride insulation makes it chemical, heat, abrasion, weather, water, exterior oil resistant, allowing it to pass not only the UL VW-1 & CSA FT2 flame test. With temperatures of 60°C, 75°C, 90°C and 105°C, as well as a rated voltage of 300V, it’s ideal for use in hard usage where durability and flexibility is required and in wet or dry conditions with strenuous temperatures such as in light duty portable cordage of tools, dishwashers,
medical equipment and office machines.Min/Mult: 50/50
SKU: WSJTOW18/3WHT-I -
Portable Cord, SJTOW
SJTOW 18/3 60C 300V – White
SJTOW 18/3 AWG portable cord is constructed with stranded, bare copper conductors. Its thermoplastic polyvinylchloride insulation makes it chemical, heat, abrasion, weather, water, exterior oil resistant, allowing it to pass not only the UL VW-1 & CSA FT2 flame test. With temperatures of 60°C, 75°C, 90°C and 105°C, as well as a rated voltage of 300V, it’s ideal for use in hard usage where durability and flexibility is required and in wet or dry conditions with strenuous temperatures such as in light duty portable cordage of tools, dishwashers,
medical equipment and office machines.Min/Mult: 50/50
SKU: WSJTOW18/3WHT-395 -
Portable Cord, SJTOW
SJTOW 18/6 105C 300V – White
SJTOW 18/6 AWG portable cord is constructed with stranded, bare copper conductors. Its thermoplastic polyvinylchloride insulation makes it chemical, heat, abrasion, weather, water, exterior oil resistant, allowing it to pass not only the UL VW-1 & CSA FT2 flame test. With temperatures of 60°C, 75°C, 90°C and 105°C, as well as a rated voltage of 300V, it’s ideal for use in hard usage where durability and flexibility is required and in wet or dry conditions with strenuous temperatures such as in light duty portable cordage of tools, dishwashers,
medical equipment and office machines.Min/Mult: 50/50
SKU: WSJTOW18/6WHT -
Portable Cord, SJTW
SJTW 16/3 105C 300V – White
SJTW 16/3 AWG portable cord is constructed with stranded, bare copper conductors. Its thermoplastic polyvinylchloride insulation makes it chemical, heat, abrasion, weather and water resistant, allowing it to pass not only the UL VW-1 & CSA FT2 flame test. With temperatures of 60°C, 75°C, 90°C and 105°C, as well as a rated voltage of 300V, it’s ideal for use in light duty portable cordage of tools, dishwashers, medical equipment and office machinery.
Min/Mult: 50/50
SKU: WSJTW16/3WHT -
Portable Cord, SJTW
SJTW 18/3 105C 300V – White
SJTW 18/3 AWG portable cord is constructed with stranded, bare copper conductors. Its thermoplastic polyvinylchloride insulation makes it chemical, heat, abrasion, weather and water resistant, allowing it to pass not only the UL VW-1 & CSA FT2 flame test. With temperatures of 60°C, 75°C, 90°C and 105°C, as well as a rated voltage of 300V, it’s ideal for use in light duty portable cordage of tools, dishwashers, medical equipment and office machinery.
Min/Mult: 50/50
SKU: WSJTW18/3WHT -
Portable Cord, STOW
STOW 18/3 105C 600V – White
STOW 18/3 AWG portable cord is constructed with stranded, bare copper conductors. Its thermoplastic polyvinylchloride insulation makes it chemical, heat, abrasion, weather, water, exterior oil resistant, allowing it to pass the UL VW-1 and CSA FT2 flame test. With minimum and maximum temperatures of 60°C, 75°C, 90°C and 105°C, as well as a rated voltage of 600V, it’s ideal for use in hard service use in motor operated tools.
Min/Mult: 50/50
SKU: WSTOW18/3WHT -
Portable Cord, SVT
SVT 18/2 105C 300V – White
SVT 18/2 AWG portable cord is constructed with stranded, bare copper conductors. Its thermoplastic polyvinylchloride insulation makes it chemical, heat and abrasion resistant, allowing it to pass the flame test. With minimum and maximum temperatures of -20°C and 105°C, as well as a rated voltage of 300V, it’s ideal for use in hard service use in floor care appliances, household food preparing machines, lamps, clocks, fans, blowers, home entertainment appliances, etc.
Min/Mult: 50/50
SKU: WSVT18/2WHT -
Automotive Wire & Cable, Cross Link Wire, SXL
SXL 08 AWG 19 Strand 125C 60V – Bare Copper
SXL 8 AWG Automotive Cross Link Wire is constructed with stranded, bare copper conductors. Its crosslinked polyethylene insulation makes it chemical and heat resistant, allowing it to pass the flame test. With minimum and maximum temperatures of -40°C and 125°C, as well as a rated voltage of 60V, it’s ideal for use in automotive wiring connectors and engine compartments applications where higher heat resistance is required.
Min/Mult: 50/10
SKU: WSXL0819-B -
Automotive Wire & Cable, Cross Link Wire, SXL
SXL 10 AWG 19 Strand 125C 60V – Bare Copper
SXL 10 AWG Automotive Cross Link Wire is constructed with stranded, bare copper conductors. Its crosslinked polyethylene insulation makes it chemical and heat resistant, allowing it to pass the flame test. With minimum and maximum temperatures of -40°C and 125°C, as well as a rated voltage of 60V, it’s ideal for use in automotive wiring connectors and engine compartments applications where higher heat resistance is required.
Min/Mult: 50/10
SKU: WSXL1019-B -
Automotive Wire & Cable, Cross Link Wire, SXL
SXL 12 AWG 19 Strand 125C 60V – Bare Copper
SXL 12 AWG Automotive Cross Link Wire is constructed with stranded, bare copper conductors. Its crosslinked polyethylene insulation makes it chemical and heat resistant, allowing it to pass the flame test. With minimum and maximum temperatures of -40°C and 125°C, as well as a rated voltage of 60V, it’s ideal for use in automotive wiring connectors and engine compartments applications where higher heat resistance is required.
Min/Mult: 50/10
SKU: WSXL1219-B -
Automotive Wire & Cable, Cross Link Wire, SXL
SXL 14 AWG 19 Strand 125C 60V – Bare Copper
SXL 14 AWG Automotive Cross Link Wire is constructed with stranded, bare copper conductors. Its crosslinked polyethylene insulation makes it chemical and heat resistant, allowing it to pass the flame test. With minimum and maximum temperatures of -40°C and 125°C, as well as a rated voltage of 60V, it’s ideal for use in automotive wiring connectors and engine compartments applications where higher heat resistance is required.
Min/Mult: 50/10
SKU: WSXL1419-B -
Automotive Wire & Cable, Cross Link Wire, SXL
SXL 16 AWG 19 Strand 125C 60V – Bare Copper
SXL 16 AWG Automotive Cross Link Wire is constructed with stranded, bare copper conductors. Its crosslinked polyethylene insulation makes it chemical and heat resistant, allowing it to pass the flame test. With minimum and maximum temperatures of -40°C and 125°C, as well as a rated voltage of 60V, it’s ideal for use in automotive wiring connectors and engine compartments applications where higher heat resistance is required.
Min/Mult: 50/10
SKU: WSXL1619-B -
Automotive Wire & Cable, Cross Link Wire, SXL
SXL 18 AWG 16 Strand 125C 60V – Bare Copper
SXL 18 AWG Automotive Cross Link Wire is constructed with stranded, bare copper conductors. Its crosslinked polyethylene insulation makes it chemical and heat resistant, allowing it to pass the flame test. With minimum and maximum temperatures of -40°C and 125°C, as well as a rated voltage of 60V, it’s ideal for use in automotive wiring connectors and engine compartments applications where higher heat resistance is required.
Min/Mult: 50/10
SKU: WSXL1816-B -
Automotive Wire & Cable, Cross Link Wire, SXL
SXL 20 AWG 07 Strand 125C 60V – Bare Copper
SXL 20 AWG Automotive Cross Link Wire is constructed with stranded, bare copper conductors. Its crosslinked polyethylene insulation makes it chemical and heat resistant, allowing it to pass the flame test. With minimum and maximum temperatures of -40°C and 125°C, as well as a rated voltage of 60V, it’s ideal for use in automotive wiring connectors and engine compartments applications where higher heat resistance is required.
Min/Mult: 50/10
SKU: WSXL2007-B -
Building & Fixture Wire, Fixture Wire, TFFN
TFFN 16 AWG 19 Strand 75C 600V – Bare Copper
TFFN 16 AWG Fixture Wire is constructed in stranded or solid, bare copper conductors. Its polyvinylchloride insulation makes it oil and water resistant, allowing it to pass the flame test. With a maximum temperatures of 105°C, as well as a rated voltage of 1000V, it’s ideal for use in the wiring of machine tools, appliances, control circuits, installation in conduit or other raceways and for new construction.
Min/Mult: 250/50
SKU: WTFFN1619-B -
Building & Fixture Wire, Fixture Wire, TFFN
TFFN 16 AWG 26 Strand 75C 600V – Bare Copper
TFFN 16 AWG Fixture Wire is constructed in stranded or solid, bare copper conductors. Its polyvinylchloride insulation makes it oil and water resistant, allowing it to pass the flame test. With a maximum temperatures of 105°C, as well as a rated voltage of 1000V, it’s ideal for use in the wiring of machine tools, appliances, control circuits, installation in conduit or other raceways and for new construction.
Min/Mult: 250/50
SKU: WTFFN1626-B -
Building & Fixture Wire, Fixture Wire, TFFN
TFFN 16 AWG 26 Strand 75C 600V – Tinned Copper
TFFN 16 AWG Fixture Wire is constructed in stranded or solid, bare copper conductors. Its polyvinylchloride insulation makes it oil and water resistant, allowing it to pass the flame test. With a maximum temperatures of 105°C, as well as a rated voltage of 1000V, it’s ideal for use in the wiring of machine tools, appliances, control circuits, installation in conduit or other raceways and for new construction.
Min/Mult: 250/50
SKU: WTFFN1626-T -
Building & Fixture Wire, Fixture Wire, TFFN
TFFN 18 AWG 16 Strand 75C 600V – Bare Copper
TFFN 18 AWG Fixture Wire is constructed in stranded or solid, bare copper conductors. Its polyvinylchloride insulation makes it oil and water resistant, allowing it to pass the flame test. With a maximum temperatures of 105°C, as well as a rated voltage of 1000V, it’s ideal for use in the wiring of machine tools, appliances, control circuits, installation in conduit or other raceways and for new construction.
Min/Mult: 250/50
SKU: WTFFN1816-B -
Building & Fixture Wire, Fixture Wire, TFN
TFN 16 AWG Solid 90C 600V – Bare Copper
TFN 16 AWG Fixture Wire is constructed in stranded or solid, bare copper conductors. Its polyvinylchloride insulation makes it oil and water resistant, allowing it to pass the flame test. With a maximum temperatures of 105°C, as well as a rated voltage of 1000V, it’s ideal for use in the wiring of machine tools, appliances, control circuits, installation in conduit or other raceways and for new construction.
Min/Mult: 250/50
SKU: WTFN1601-B -
Building & Fixture Wire, Fixture Wire, TFN
TFN 18 AWG Solid 90C 600V – Bare Copper
TFN 18 AWG Fixture Wire is constructed in stranded or solid, bare copper conductors. Its polyvinylchloride insulation makes it oil and water resistant, allowing it to pass the flame test. With a maximum temperatures of 105°C, as well as a rated voltage of 1000V, it’s ideal for use in the wiring of machine tools, appliances, control circuits, installation in conduit or other raceways and for new construction.
Min/Mult: 250/50
SKU: WTFN1801-B -
Building & Fixture Wire, Building Wire, THHN
THHN 06 AWG 19 Strand 90C 600V – Bare Copper
THHN 6 AWG Building Wire is constructed with stranded or solid, bare copper conductors. Its polyvinylchloride insulation makes it oil, gasoline and heat resistant. With a maximum temperatures of 90°C, as well as a rated voltage of 600V, it’s ideal for use in wiring of machine tools, appliances, control circuits, installation in conduit or other raceways and for new construction.
Min/Mult:100/50
SKU: WTHHN0619-B -
Building & Fixture Wire, Building Wire, THHN
THHN 08 AWG 19 Strand 90C 600V – Bare Copper
THHN 8 AWG Building Wire is constructed with stranded or solid, bare copper conductors. Its polyvinylchloride insulation makes it oil, gasoline and heat resistant. With a maximum temperatures of 90°C, as well as a rated voltage of 600V, it’s ideal for use in wiring of machine tools, appliances, control circuits, installation in conduit or other raceways and for new construction.
Min/Mult:100/50
SKU: WTHHN0819-B
